hacklab.to

Author Archive

Photo of the week: Pick.

by on Oct.22, 2013, under Unpatched Tuesdays

This weeks photo of the week comes in a pair,  I could not decide upon a single photo from last weeks Open house.

Preparing a lock  to have its pins drilled out.

Preparing a lock to have its pins drilled out.

Marking where the pins are to be drilled out.

Marking where the pins are to be drilled out.

Comments Off on Photo of the week: Pick. :, , more...

Photo of the week; Cutting away.

by on Oct.12, 2013, under Unpatched Tuesdays

Last time I was at the lab I found this chip had been left on the work table for others to examine.  I believe the chip is a EPROM.

Last time I was at the lab I found this chip had been left on the work table for others to examine. I believe the chip is a EPROM.

Comments Off on Photo of the week; Cutting away. :, , , , , , , more...

Toronto Mini Maker Faire

by on Sep.23, 2013, under Events, Projects

This years Mini Maker Faire in Toronto is over, but it was a grand success in my eyes.
People from all walks of life and age came out to explore, create, share ideas, and hack.
I believe the community just became a little bit bigger from this weekend, and a lot closer for those already in the community creating new connections and friendships.
I am hard at work combing through the photos, trying to decide what to do with them all.

I hope everyone had a blast this weekend and made memorys.
Here are a few moments I captured that I care to share.

This is the Droid you are looking for.

This is the Droid you are looking for.

Lock-Pick Village

Lock-Pick Village

RGB LED strip Holds wonder.

RGB LED strip Holds wonder.

 

 

 

 

 

 

 

 

 

 

Comments Off on Toronto Mini Maker Faire :, , , , , , more...

Double Post; Lights, Camera, Bearing!

by on Aug.29, 2013, under 3D Printing, Projects, Unpatched Tuesdays

This weeks post is split into two, the first half is about a bearing made at the lab this week. The second half below the 4 photos from this week you will read about my adventures in Alberta and how I relate them to the community. This week  Atrain decided to outdo me and print a better bearing. If you frequent Hacklab, you may have played with the bright green printed bearing that is stiff and does not seem to be effective. Both of these bearings are open source, the bearing design is generated in OpenSCAD and is personalized to your printer. You can find the design on Thingiverse. Well Atrain did just that, went ahead and printed a bearing out of orange ABS on the Cupcake printer. The Cupcake is the oldest 3D printer the lab has, and of late it has been receiving quite a lot of TLC and some upgrades causing it now provide the Ultimaker with a bit of a competition. See the photos to see the great print quality, and the bearings in action.

Close up of the bearing.

Atrain preparing the 3D bearing for a test spin.

The Bearing in action.

The bearing resting,

LED's behind a defusing medium.

 

 

 

 

 

 

 

 

 

I have been a little lax this month on posting new photos.  This has not been out of laziness, or the excuse there is simply no room on my camera. No, I have been away travelling around Alberta and volunteering at the annual  Canadian Institute for Theatre Technology conference (CITT). This year the conference was held in Calgary and while in town I took the chance when I had it to visit Protospace, Calgarys hacker space.                                 .

Moving Head fixture. This light on closer inspection is mainly built of stepper motors and controllers. The case contains atleast 9 stepper motors.

The CITT conference is an annual trade show for industry Representatives, Technicians, and more. Over the last few years of volunteering at the conference I have seen more DIY, RaspberryPI, Arduinos, 3D printing, and approaches to theatre discussed in a hacker and maker mindset. Theatre has always been a hacker and maker space, using little to no resources and lots of ingenuity, and usually little time.                          The diverse background of those in theatre, are possibly akin to those in the maker and hacker community.  Each person in a hackerspace has unique knowledge and skills. I forsee in the future theatre nestling or cuddling up to the maker community. The future should be an interesting one.

1 Comment :, , , , , more...

Photo of the week; Happy 5th Birthday HackLab

by on Jul.30, 2013, under Events

Happy Birthday HackLab.

HackLab Birthday Korma.

Comments Off on Photo of the week; Happy 5th Birthday HackLab :, , , , more...

Photos of the week; The look of success.

by on Jul.19, 2013, under Projects

This weeks is to be viewed as a bit of a comic strip.
Effect and Cause, Cause and Effect.

What ever is causing such a contemplating look?

Why it is his recent test of his Game of Life program.

 

Comments Off on Photos of the week; The look of success. :, , , more...

Hacklab; One step closer to self replication.

by on Jun.23, 2013, under 3D Printing, Announcements, Events, Unpatched Tuesdays

Tuning the newly assembled Series 1 3D printer, from Type A Machines.

As of late Tuesday night, HackLab is now the proud owner of a Series 1 3D printer, by Type A Machines. Leading to 5 members to tackle the construction, calibrations, initial tuning and testing of the printer. I expect throughout the following week the printer will be fine tuned and will settle in amongst the other printers we have in the lab.  I am sure we will be printing some add-ons for the Series 1 soon as well once the tuning is done, such as a tool rest and holder. We may even be adding LED lights to it to better see how the print job is adhering to the surface and see when problems are occurring in during the print job.                                                              I care to thank Type A Machines for the donation of the new printer, and care to extend an invitation to please stop by the lab during our Open House to see what we are creating with this amazing printer.

3D printers settling in to their new place in the lab.

 

 

 

 

 

 

 

At the rate we are building, working with, and utilizing 3D printers we may have to designate part of HackLab the Print Lab. I hope soon we can add the second Ultimaker we have been slowly repairing to our library of tools allowing more members to print at the same time and gain experience working with these tools. Thank you again Type A Machines for aiding to our creative, and educational tool library.

For 11 more photos from the build. and a photo of the first item printed please click upon the (continue reading) text below for more.

(continue reading…)

Comments Off on Hacklab; One step closer to self replication. :, , , , , more...

Toronto Mini-Maker Fair

by on Jun.08, 2013, under Events, Projects, Unpatched Tuesdays

Mini Maker Faire Toronto Launch Party.

What does this room of people all have in common?

Arts and crafts being setup.

 

 

 

 

 

Several weeks ago now the Toronto Mini Maker Faire Launch party happened.

You can find more images on the following photo streams; Photo booth shots and more,  Photos by Adam Evenden

Upon entering the launch party and registering attendees where faced with an arts and crafts table, full of hot glue, blank masks, LED’s, Coin battery’s, pipe cleaners, markers,  tape, Glitter, and more.
Click more to see some of the creations.

(continue reading…)

Comments Off on Toronto Mini-Maker Fair :, , , , , , , , , , , , , , , , , more...

Photo of the week; Prototype

by on May.01, 2013, under Unpatched Tuesdays

Mid prototype build for a fan controller.

Comments Off on Photo of the week; Prototype :, , , , , more...

Photo of week; Welcome.

by on Apr.24, 2013, under Unpatched Tuesdays

Atrain showing us his VFD.

Comments Off on Photo of week; Welcome. :, , , more...

Looking for something?

Use the form below to search the site:

Still not finding what you're looking for? Drop a comment on a post or contact us so we can take care of it!